How to Restring an Electric Guitar That Has String Retainers

Last Updated on September 3 by Monty Python

Proper guitar setup is important when you have an electric guitar so that you can play it effectively and without trouble. You want the best sound from your electric guitars and changing over the strings can also be a very important task to undertake. Also, check out the best acoustic-electric guitar under $300 guitar

However, when you have string retainers, a lot of people find they struggle to restring their electric guitar. So, how can you restring your guitar when it has string retainers?

Learn more about Chapman Guitar ML1 Modern V2 Review

Table of Contents

Step One – Remove Old Strings

You have to carefully remove the strings which have been wrapped around the string retainers. You will have to unwrap the strings carefully so that you don’t damage the retainers. It should be fairly simple to remove the strings once the strings are unwrapped from the retainers. This should take a few minutes at best and once you do, you will be able to start restringing the guitar.

Step Two – Adding New Strings

Firstly, you need to take the new strings from the start of the bridge of the guitar and will need to pass them through the hole of the guitar. You will find a ball there which prevents you from moving the strings any further.

You will find the ball helps to keep the string in place. Then, you will need to carefully thread the strings to the string retainers. This is not overly difficult to do and if you are careful about it, you shouldn’t have too much trouble. You do have to be careful and be gentle too otherwise; if you’re too rough you’ll damage the strings or possibly the guitar.

Steps Three – Placing the Strings and Tuning

Next, you want to ensure each string has been placed in the correct position so that it matches up with the nut it’s supposed to. You will need to carefully pass the string through the slot in the guitar and carefully place it onto the string retainers. However, there needs to be ample room for the string. You need to leave room between the tuning post and the bridge.

Learning about the proper guitar setup is pretty easy but again, if you do it wrong, everything can go a bit awry. If you don’t have enough slack then winding might be extremely difficult. The last thing for you to do is to tune the strings which you must do carefully.

Restringing With Ease

It looks a lot more complicated than it is when it comes to restringing an electric guitar. Now, it is not always going to be overly simple especially if you haven’t done this before but in time you will get used to how it all works and will be able to do so with minimal fuss or effort.

That can be so important for those who don’t have a lot of knowledge of such things. However, you should restring carefully and slowly. There is no rush here and if you take your time, you’re more likely to get things right. You can get your guitar kits in good shape once again.